Netherlands Super audio equipment

GCYP series solid-state super audio equipment adopts modern power electronic device IGBT (insulated gate bipolar transistor) module as the key device of inverter. The control system is composed of rectification, power regulation, protection and control circuits, advanced frequency tracking, constant angle inverter triggering and optimized IGBT drive and protection circuits. It has the advantages of high efficiency, simple and reliable circuit, convenient debugging and operation, etc. It can not only improve the production process for production enterprises, improve product quality, but also has a significant energy saving effect.

GCYP series solid-state super audio equipment is a three-phase power frequency 50Hz AC into a single-phase AC (7~50kHz) super audio power supply, can be widely used in metal melting, welding, diathermy and quenching and other hot processing, heat treatment occasions.

1 indoor installation, the equipment grounding is good, the grounding wire color must be significantly different from the control line, its cross-sectional area> 4mm2, grounding resistance is not more than 4Ω;

2 The altitude shall not exceed 1000 meters, otherwise the rated value shall be lowered for use;

3 The ambient temperature shall not exceed 40 ℃ and not lower than -10 ℃;

4 The relative humidity of the air is not more than 85%;

5 no severe vibration, no conductive dust, no corrosive gases and explosive gases;

6 The installation inclination is not more than 5 degrees;

7 installed in good ventilation occasions.